The SuperK EXTREME series is based on NKT Photonics world renowned Crystal Fibre technology that has reliably delivered supercontinuum to all fields for over 10 years. The SuperK platform is fully modular, allowing easy operation and service where accessory modules can be added without configuration—all plug & play.
Operation is simple and functions can be changed on-the-fly without powering down the system. The SuperK EXTREME series provides high power and exceptional lifetime together with the highest of safety standards.
- 400-2400 nm single mode output
- Robust and maintenance-free
- On-the-fly variable repetition rate
- Plug’n’Play filter accessories
- Flexible trigger and power locking functions
- Operation at the press of a button
- NIM trigger output approved for FLIM
Spectral variants and power levels
Violet (EXU), White (EXW) or Red (EXR) spectrum. Up to 3.5 W in the visible wavelength region. See the available models in the table below. Should you require more power later, a SuperK laser can easily be upgraded to a higher power level.
|EXU series||EXW series||EXR series||Visible power
On-the-fly variable repetition rate (pulse picker) or fixed repetition rate of 40 or 78 MHz (other rep rates available upon request)
Extend the normal 24 month warranty with an extra 12 or 24 months
|Repetition Rate||78 MHz|
|Total visible power stability||< ± 0.5 %|
|Beam output||Gaussian, single mode|
|Length of output fiber||1.5 m|
|Beam diameter||~1 mm at 530 nm
~2 mm at 1100 nm
~3 mm at 2000 nm
|Beam Divergence (half angle)||< 5 mrad|
|Beam Pointing Accuracy*||< 1 mrad|
|Beam Pointing Stability||< 50 µrad|
|Typical single mode fiber coupling efficiency||>70 %|
Mechanical / Electrical
|Computer Interface||USB 2.0|
|Operation Voltage||100-240 VAC 50/60 Hz|
|Power Consumption||<100 W (<120W with pulse picker)|
|Door Interlock Connector**||2-pin LEMO|
|External Bus interface***||15-pin sub-D|
|System Cooling||Air Cooled|
|Operation Temperature||+18o to +30oC|
|Storage Temperature||-10o to +60oC|
|Dimensions (WxHXL)||440x243x380 mm|
|Weight||18 kg (19 kg with variable rep rate)|
* Measured relative to the mechanical axis running through the center of the collimator
** The SuperK Extreme is a Class 4 laser and is required to be connected to a door interlock/circuit
*** External communication and power supply port for accessories
Easy Turn-Key System With Fail Safe Operation
The SuperK EXTREME is easy to use and provides supercontinuum light at a press of a button! The emission button also allows immediate switching of light on or off without the need to reduce optical power or waiting for warm up or cool down. The SuperK EXTREME remembers the latest power or current set of the laser when the laser is switched off in standby mode so it returns to the same level when emission is activated again.
The easy jog wheel system is used to control the operation of the unit and functions such as constant power/current mode, repetition rate control and laser status can be chosen effortlessly. The Constant Power Mode function allows linear variation of the VIS output power from 0-100%.
The SuperK EXTREME has a truly modular design, allowing easy on-site support or upgrades. As the on-board electronics records all operational aspects of each module, the user can download a full operational history of the SuperK EXTREME for servicing or monitoring requirements.
Due to the unique modularity, upgrading a SuperK laser has never been easier. Unsure of how much power you need? Not a problem. Start with a low power model, and upgrade with high power modules when you need it. Easy and cost effective.
The core of the SuperK EXTREME is based on the world renowned Crystal Fibre PCF technology, which has been deployed in commercial and academic markets for over a decade. NKT Photonics is the largest manufacturer of PCF technology and reliability, quality and performance is ensured through DIN ISO 9000 certified processes.
Continuous testing of multiple systems during and after the development phase of the new SuperK EXTREME has ensured the longest continuous running lifetime in the market. The SuperK EXTREME is a real alternative to traditional laser sources in OEM or industrial applications, where reliability and cost of ownership are key factors in choosing the most appropriate light source technology.
For applications demanding high performance in beam output, the SuperK EXTREME provides the perfect solution. Diffraction limited output from a proprietary collimator design ensures superb single mode, broadband collimation at high power. The deployment of the SuperK EXTREME in Leica’s SP8X confocal microscope gives users the ability to perform high resolution diffraction limited microscopy due to the superior beam quality. This is also extremely important when employing SuperK Accessories. High pointing accuracy and broadband beam collimation ensures filtering and beam steering operations are made precisely and finally, the excellent single mode Gaussian beam quality ensures coupling of light back into single mode fiber at efficiencies of over 70%
The SuperK EXTREME has a range of connection functions allowing the user to trigger, monitor and expand the functions of the source. Standard triggering and synchronization functions (such as NIM) are provided for downstream control of equipment. Pulse timing signals are available for monitoring the status of the SuperK under variable repetition rate. More importantly, the SuperK is now equipped with a digital communication bus interface for intelligent communication with the SuperK Accessory suite. No need for complicated driver downloads, just plug in the accessory and let the SuperK EXTREME do the rest!
|All NKT Photonics products are produced under our quality management system certified in accordance with the ISO 9001:2015 standard.|