Onefive ORIGAMI laser accessories

The Onefive ORIGAMI accessory range offers everything needed to enhance the versatility and flexibility of the Onefive Ultrafast Lasers. The accessories are available in a wide range of options useful to increase the lasers performance.

Onefive Ultra Low Noise Laser Controller

Low noise electronics and low noise current source for ultra-low timing jitter

Ultra low noise driver front and back

The plug & play, add-on module ULTRA-LOW NOISE LASER CONTROLLER is a ultra-low noise current source developed by Onefive to drive its mode-locked laser units with the lowest possible timing-jitter. It can drive the laser pulse train to show a timing jitter of only 400 as over long time [1 Hz – 1 MHz] and even down to 70 as during shorter time [1 kHz – 1 MHz]. It has been developed for high-end synchronization applications.

  • Compact
  • Easy installation (plug & play)
  • Push-button operation
  • Passively air cooled
  • 100% compatible with standard driver LP-compact

See phase noise/timing jitter here.

Onefive Laser Synchronization Module

Compact and simple synchronization module

Sync module front and back

The plug & play add-on module SYNC allows the synchronization of pulsed laser trains to an external reference signal. It guarantees highly reliable locking of the laser repetition rate to a user supplied RF reference source.  It is one of the world most compact synchronization add-on modules (160 mm x 100 mm footprint)  and it is designed for 24/7 operation. No PC or any other control or monitor device is necessary to operate this module. The absence of any stepper motor solution for coarse frequency adjustment enabled by the low drift Origami and Genki laser series ensures noise free adjustment of coarse frequency and drives down cost, volume and system complexity.

  • Very compact
  • Easy installation (plug & play)
  • Push-button operation
  • Phase-locked loop bandwidth 500 Hz

Onefive Ultra-Low Noise Synchronization Module

Synchronization module for femtosecond-precision laser applications

Ultra low noise driver front and back

The plug & play add-on module LOW NOISE SYNC allows to synchronize ultra-short laser pulse trains with femtosecond precision. It guarantees reliable locking of the lasers repetition rate over a long time scale and has been built to satisfy high-precision, synchronization applications. No PC or any other control or monitor device is necessary to operate this module.

  • Compact
  • Push-button operation
  • Phase-locked loop bandwidth 10 kHz
  • Phase-lock established at high harmonic (typically around 3 GHz) leading to low noise operation

Onefive CEP ready

Electronic Architecture Allowing Carrier Phase Control

Onefive CEP ready

The CEP READY system consists of advanced laser and electronic architecture which allows to control the Carrier Envelope Phase (CEP) of the lasers in addition to the pulse repetition rate. This option, allowing to modulate both the repetition rate and the CEP independently, enables simple frequency combs based on the low noise Origami femtosecond laser. The excellent signal to noise ratio of the free running CEO beat allows for all high-precision applications.

  • Integrated in the laser architecture
  • No installation required
  • Push-button operation
  • Modulation of laser repetition rate
  • Control of Carrier Phase Envelope